HP storageworks HSG80 Reference Manual page 200

CLI Command Descriptions
SHOW STRIPESETS
Displays information about all stripesets known to the subsystem.
Syntax
SHOW STRIPESETS
Parameters
There are no parameters associated with this command.
Switches
The following switch is available for the SHOW STRIPESETS command:
• FULL
Example
BOT> show stripesets
Name
------------------------------------------------------------------
S1
See Also
ADD STRIPESETS
DELETE container-name
SHOW stripeset-name
2–184
Storageset
stripeset
HSG80 Array Controller V8.7 Command Line Interface Reference Guide
Uses Used by
M1
M2
D4