HP storageworks HSG80 Reference Manual page 194

CLI Command Descriptions
SHOW REMOTE_COPY_SETS
Displays information on all remote copy sets known to the subsystem.
Syntax
SHOW REMOTE_COPY_SETS
Parameters
There are no parameters associated with this command.
Switches
The following switch is available for the SHOW REMOTE_COPY_SETS command:
• FULL
Example
INT_TOP> show remote_copy_sets
Name
------------------------------------------------------------------
RCS1
RCS2
RCS3
RCS4
See Also
ADD ASSOCIATIONS
ADD REMOTE_COPY_SETS
DELETE remote-copy-set-name
SET remote-copy-set-name
SHOW ASSOCIATIONS
SHOW controller
SHOW remote-copy-set-name
2–178
remote copy
remote copy
remote copy
remote copy
HSG80 Array Controller V8.7 Command Line Interface Reference Guide
Uses Used by
D1
D2
D3
D4
A1
A1
A1
A1