HP storageworks HSG80 Reference Manual page 75

DELETE concatset-name
Deletes an existing concatset. If the concatset is associated with a unit, the unit must
be deleted before deleting the concatset.
Syntax
DELETE concatset-name
Parameters
concatset-name
The name of the concatset to be deleted.
Switches
There are no switches associated with this command.
Examples
To delete concatset C1, which is associated with unit D0, enter:
DELETE D0
DELETE C1
See Also
DELETE unit-number
SET concatsets
HSG80 Array Controller V8.7 Command Line Interface Reference Guide
DELETE concatset-name
2–59