Storageset Commands; Partition Commands - HP storageworks HSG80 Reference Manual

CLI Command Introduction
• SET unit-number (the ENABLE_ACCESS_PATH switch)
• SET unit-number (the DISABLE_ACCESS_PATH switch)
• ADD CONNECTIONS (the UNIT_OFFSET switch)
• SET connection-name (the UNIT_OFFSET switch)

Storageset Commands

Storageset commands create and configure complex containers made from groups of
device containers. These commands group device containers together and allow them
to be handled as single units. There are four types of storagesets: stripesets, RAIDsets,
striped-mirrorsets, and mirrorsets.
The CLI commands that pertain to storagesets include:
• ADD MIRRORSET
• ADD RAIDSET
• ADD STRIPESET
• DELETE
• INITIALIZE
• LOCATE
• MIRROR
• REDUCE
• RENAME
• SET
• SHOW
• UNMIRROR

Partition Commands

Partition commands create multiple logical disk units from the same container.
The CLI Commands that pertain to partitions include:
• CREATE_PARTITION
• DESTROY_PARTITION
1–4 HSG80 Array Controller V8.7 Command Line Interface Reference Guide