HP storageworks HSG80 Reference Manual page 162

CLI Command Descriptions
Table 2–5: SET unit-number Switches for Existing Containers (Continued)
PREFERRED_PATH
NOPREFERRED_PATH
READ_CACHE
NOREAD_CACHE
READAHEAD_CACHE
NOREADAHEAD_CACHE
RUN
NORUN
WRITE_LOG
NOWRITE_LOG
WRITE_PROTECT
NOWRITE_PROTECT
WRITEBACK_CACHE
NOWRITEBACK_CACHE
ENABLE_ACCESS_PATH=connection-names
ENABLE_ACCESS_PATH=ALL (default)
DISABLE_ACCESS_PATH=connection-names
DISABLE_ACCESS_PATH=ALL
Specifies the access path. It can be a single specific host ID, multiple host IDs, or
all host IDs (ALL). If you have multiple hosts on the same bus, you can use this
switch to restrict hosts from accessing certain units. This switch limits visibility of
specific units from certain hosts. For example, if two hosts are on the same bus,
you can restrict each host to access only specific units.
2–146
Switch
HSG80 Array Controller V8.7 Command Line Interface Reference Guide