HP storageworks HSG80 Reference Manual page 58

CLI Command Descriptions
CLEAR_ERRORS CLI
Stops the display of current or previous error messages at the CLI prompt. Errors are
displayed (even after the error condition has been rectified) until the controller is
restarted or this command is entered.
NOTE: This command does not clear the error condition. The command only stops the CLI
from displaying the error.
There are three message types:
• General information
• Warning (user may want to examine, but the command is executed)
• Error (command will not execute)
Syntax
CLEAR_ERRORS CLI
Parameters
There are no parameters associated with this command.
Switches
There are no switches associated with this command.
Example
To clear any message enter:
CLEAR_ERRORS CLI
See Also
CLEAR_ERRORS controller INVALID_CACHE
CLEAR_ERRORS unit-number LOST_DATA
CLEAR_ERRORS device-name UNKNOWN
CLEAR_ERRORS unit-number UNWRITEABLE_DATA
2–42 HSG80 Array Controller V8.7 Command Line Interface Reference Guide