HP storageworks HSG80 Reference Manual page 172

CLI Command Descriptions
SHOW concatset-name
Displays information on the specified concatset.
Syntax
SHOW concatset-name
Parameters
concatset-name
Specifies the name of the concatset to be displayed.
Switches
There are no switches associated with this command.
Example
BOT> show C1
Name
------------------------------------------------------------------
C1
See Also
ADD CONCATSET
SET concatset-name
SHOW CONCATSET
2–156
Storageset
concatset
State:
NORMAL
DISK10300 (member
DISK30400 (member
Size:
HSG80 Array Controller V8.7 Command Line Interface Reference Guide
0) is NORMAL
1) is NORMAL
35538354 blocks
Uses Used by
DISK10300
DISK30400
D1