HP storageworks HSG80 Reference Manual page 195

SHOW remote-copy-set-name
Displays information on the specified remote copy set.
Syntax
SHOW remote-copy-set-name
Parameters
remote-copy-set-name
Specifies the name of the remote copy set to be displayed.
Switches
There are no switches associated with this command.
Example
INT_TOP> show RCS1
Name
------------------------------------------------------------------
RCS1
HSG80 Array Controller V8.7 Command Line Interface Reference Guide
remote copy
Reported LUN ID: 6000-1FE1-FF00-0090-0001-0010-3889-05C0
Switches:
OPERATION_MODE
ERROR_MODE
FAILOVER_MODE
OUTSTANDING_IOS = 200
Initiator (INT\D1) state:
ONLINE to this controller
Not reserved
Target state:
TGT\D1
= SYNCHRONOUS
= NORMAL
= MANUAL
is NORMAL
SHOW remote-copy-set-name
Uses Used by
D1 A1
2–179