Remove The Rcm Module; Remove The Power Supply - HPE Apollo 2000 User Manual

Remove the RCM module

To remove the component:
Power down all nodes
1.
Access the product rear panel.
2.
Disconnect all cables from the RCM module.
3.
Remove the RCM module.
4.

Remove the power supply

To remove the component:
Power down all nodes
1.
Access the product rear panel.
2.
If installed, remove the RCM module (on page 34).
3.
Release the power cord from the strain relief strap.
4.
Remove all power:
5.
Disconnect the power cord from the power source.
a.
Disconnect the power cord from the chassis.
b.
("Power down the node" on page 32).
("Power down the node" on page 32).
Operations 34