HPE Apollo 2000 User Manual page 44

If installed in a 2U node, remove the FlexibleLOM 2U node riser cage assembly
5.
node riser cage assembly" on page 52).
If installed in a 2U node, remove the three-slot riser cage assembly
6.
assemblies" on page 52).
If an accelerator power cable is installed, disconnect it from the bayonet board.
7.
If a B140i SATA cable is installed, disconnect it from the system board.
8.
Remove the bayonet board assembly from the node.
9.
1U bayonet board assembly
o
2U bayonet board assembly
o
If installing a SATA or mini-SAS cable, remove the bayonet board bracket from the bayonet board.
10.
("FlexibleLOM 2U
("Three-slot riser cage
Operations 44