Table of Contents
Advertisement
Remove the FlexibleLOM 1U node riser cage assembly.
5.
CAUTION: To prevent improper cooling and thermal damage, do not operate the node unless
all PCI riser cages or rear I/O blanks are installed, and do not operate the node unless all PCI
slots have either an expansion slot cover or an expansion board installed.
Single-slot 2U node PCI riser cage assembly
To remove the component:
Power down the node (on page 32).
1.
Disconnect all peripheral cables from the node.
2.
Remove the node from the chassis (on page 32).
3.
Place the node on a flat, level surface.
4.
Remove the FlexibleLOM 2U node riser cage assembly (on page 52).
5.
Remove the single-slot 2U node PCI riser cage assembly.
6.
Operations 51
Advertisement
Table of Contents
