Table of Contents
Advertisement
Press and hold the processor retaining bracket in place, and then close each processor locking
12.
lever. Press only in the area indicated on the processor retaining bracket.
CAUTION: Always use a new heatsink when replacing processors. Failure to use new
components can cause damage to the processor.
Remove the thermal interface protective cover from the heatsink.
13.
CAUTION: Heatsink retaining screws should be tightened or loosened in diagonally opposite
pairs (in an "X" pattern). Do not overtighten the screws as this can damage the board,
connectors, or screws.
Install the heatsink:
14.
Position the heatsink on the processor backplate.
a.
Tighten one pair of diagonally opposite screws halfway, and then tighten the other pair of screws.
b.
Hardware options installation 129
Advertisement
Table of Contents
