HPE Apollo 2000 User Manual page 116

AMD FirePro S9150 GPU
o
IMPORTANT: If installing an Intel Xeon Phi Coprocessor 5110P, connect the power cable to
the 2x4 connector only. Do not connect the power cable to the 2x3 connector.
Connect the Accelerator 1 power cable to Accelerator 1. For more information, see "Accelerator
14.
cabling (on page 144)."
NOTE: If installing a single NVIDIA GRID K2 RAF, NVIDIA K80, and NVIDIA M60 GPU, skip
to step 21.
Remove the existing rear support bracket from Accelerator 2.
15.
If installing an AMD FirePro S9150 GPU or AMD FirePro S7150 GPU, remove the cover from
16.
Accelerator 2.
AMD FirePro S9150 GPU
o
Hardware options installation 116