Removing a drive blank
If installed, remove the security bezel (on page 35).
1.
Remove the drive blank.
2.
Installing a hot-plug drive
WARNING: To reduce the risk of injury from electric shock, do not install more than one drive
carrier at a time.
The chassis can support up to 12 drives in an LFF configuration and up to 24 drives in an SFF
configuration.
To install the component:
If installed, remove the security bezel (on page 35).
1.
Remove the drive blank
2.
Prepare the drive.
3.
SFF SmartDrive
o
Low-profile LFF hot-plug drive
o
Install the drive:
4.
("Removing a drive
blank" on page 68).
Hardware options installation 68