Hpe Apollo R2800 Chassis Drive Bay Numbering - HPE Apollo 2000 User Manual

•
Node 3 corresponds to drive bays 3-1, 3-2, 3-3, 3-5, 4-1, 4-2, 4-4 and 4-5.
For more information on installing a storage controller, see "Controller options (on page 96)."

HPE Apollo r2800 Chassis drive bay numbering

IMPORTANT: The HPE Apollo r2800 Chassis does not support nodes using the HPE
Dynamic Smart Array B140i Controller or the HPE P840 Smart Array Controller. Hewlett
Packard Enterprise recommends installing an HPE H240 Host Bus Adapter or HPE P440
Smart Array Controller.
For information on drive bay mapping in the HPE Apollo r2800 Chassis and the factory default
configuration, see "Drive bay mapping for the HPE Apollo r2800 Chassis (on page 65)."
For more information on installing a storage controller, see "Controller options (on page 96)."
Component identification 20