Table of Contents
Advertisement
Do one of the following:
4.
Remove the 1U left rear I/O blank
o
Remove the single-slot left PCI riser cage assembly (on page 48).
o
Remove the single-slot 1U node right PCI riser cage assembly.
5.
CAUTION: To prevent improper cooling and thermal damage, do not operate the node unless
all PCI riser cages or rear I/O blanks are installed, and do not operate the node unless all PCI
slots have either an expansion slot cover or an expansion board installed.
FlexibleLOM 1U node riser cage assembly
To remove the component:
Power down the node (on page 32).
1.
Disconnect all peripheral cables from the node.
2.
Remove the node from the chassis (on page 32).
3.
Do one of the following:
4.
Remove the 1U left rear I/O blank
o
Remove the single-slot left PCI riser cage assembly (on page 48).
o
("Remove the rear I/O
blank" on page 39).
("Remove the rear I/O
blank" on page 39).
Operations 50
Advertisement
Table of Contents
