Table of Contents
Advertisement
If installing NVIDIA GRID K2 Reverse Air Flow GPU Accelerators, connect the 2-pin adapter cables
22.
to the accelerators and the riser board.
Install the riser cage bracket.
23.
Connect the power cable to the bayonet board. For more information, see "Accelerator cabling (on
24.
page 144)."
Install the three-slot riser cage assembly
25.
Install the node into the chassis
26.
Connect all peripheral cables to the nodes.
27.
Power up the node
28.
M.2 SATA SSD enablement board
The M.2 SATA SSD enablement board can only be installed on the single-slot left PCI riser cage
assembly (PN 798178-B21) or the single-slot 2U node PCI riser cage assembly (PN 800293-B21).
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
("Three-slot riser cage assembly
("Installing a node into the
("Power up the
nodes" on page 32).
options" on page 93).
chassis" on page 60).
Hardware options installation 124
Advertisement
Table of Contents
