Removing And Replacing The Rcm Module - HPE Apollo z70 Maintenance And Service Manual

To replace the component, reverse the removal procedure.

Removing and replacing the RCM module

Procedure
1. Power down all servers.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the chassis.
3. Disconnect all cables from the RCM module.
4. Remove the RCM module:
a. Press and hold the RCM module latch.
b. Release the power supply strain relief strap from the RCM module latch.
c. Pull the RCM module away from the power supply handle.
Removal and replacement procedures 31