Fan locations
Drive bay numbering
CAUTION: To prevent improper cooling and thermal damage, do not operate the chassis
unless all bays are populated with a component or a blank.
NOTE: A SATA or mini-SAS cable must be installed in a node for the node to correspond to
drives in the chassis
HPE Apollo r2200 Chassis drive bay numbering
One 1U node corresponds to a maximum of three low-profile LFF hot-plug drives.
•
Node 1 corresponds to drive bays 1-1 through 1-3.
•
Node 2 corresponds to drive bays 2-1 through 2-3.
•
Node 3 corresponds to drive bays 3-1 through 3-3.
•
Node 4 corresponds to drive bays 4-1 through 4-3.
One 2U node corresponds to a maximum of six low-profile LFF hot-plug drives.
•
Node 1 corresponds to drive bays 1-1 through 2-3.
("SATA and Mini-SAS cable
options" on page 82).
Component identification 18