Table of Contents
Advertisement
Lift and remove the access panel.
11.
Install the chassis access panel
Install the chassis access panel.
1.
Place the access panel and align the pin on the chassis, and slide it towards the front of the
a.
server.
Lock the access panel latch using the T-15 Torx screwdriver.
b.
Install the chassis into the rack
2.
Install all nodes, drives and power supplies
3.
If removed, install the security bezel
4.
If removed, install the RCM module
5.
Connect all peripheral cables to the nodes and chassis.
6.
Power up the nodes (on page 32).
7.
("Installing the chassis into the
("Chassis component
("Security bezel
option" on page 67).
("RCM
module" on page 70).
rack" on page 58).
installation" on page 60).
Operations 37
Advertisement
Table of Contents
