HPE Apollo 2000 User Manual page 33

CAUTION: To avoid damage to the node, always support the bottom of the node when
removing it from the chassis.
Power down the node (on page 32).
1.
Disconnect all peripheral cables from the node.
2.
Remove the node from the chassis:
3.
Loosen the thumbscrew.
a.
Pull back the handle and remove the node.
b.
—
1U node
—
2U node
CAUTION: To avoid damage to the device, do not use the removal handle to carry it.
Place the node on a flat, level surface.
4.
Operations 33