Table of Contents
Advertisement
1U bayonet board
o
IMPORTANT: If connecting a SATA or Mini-SAS cable to the 2U bayonet board, route the
cable under the padding before installing the 2U bayonet board bracket.
2U bayonet board
o
Install the bayonet board bracket and bayonet board assembly
17.
on page 45).
Route and secure the cable under the thin plastic cover.
18.
Install any removed PCI riser cage assemblies.
19.
Install the node into the chassis
20.
Connect all peripheral cables to the nodes.
21.
Power up the node
22.
For more information about the integrated storage controller and its features, select the relevant user
documentation on the Hewlett Packard Enterprise website
(http://www.hpe.com/info/smartstorage/docs).
("Installing a node into the
("Power up the
nodes" on page 32).
("Install the bayonet board
("PCI riser cage assembly
chassis" on page 60).
Hardware options installation 103
assembly"
options" on page 84)
Advertisement
Table of Contents
