Access Management - KTI Networks KGS-1064-HP User Manual

2.5.1.6 Access Management

Add New Entry
Configure access management table on this page. The maximum number of entries is 16. If the application's
type match any one of the access management entries, it will allow access to the switch.
Configuration
Mode
Delete
Start IP Address
End IP Address
HTTP/HTTPS
SNMP
TELNET/SSH
Add New Entry
Save
Reset
Description
Indicates the access management mode operation. Possible modes are:
Enabled: Enable access management mode operation.
Disabled: Disable access management mode operation.
Check to delete the entry. It will be deleted during the next save.
Indicates the start IP address for the access management entry.
Indicates the end IP address for the access management entry.
Indicates that the host can access the switch from
IP address matches the IP address range provided in the entry.
Indicates that the host can access the switch from SNMP interface if the host IP
address matches the IP address range provided in the entry.
Indicates that the host can access the switch from
IP address matches the IP address range provided in the entry.
Click to add a new access management entry.
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
HTTP/HTTPS
TELNET/SSH
-37-
interface if the host
interface if the host