Vlans; Vlan Membership - KTI Networks KGS-1064-HP User Manual

3.13 VLANs

3.13.1 VLAN Membership

Status
VLAN USER
VLAN ID
Port Members
Description
VLAN User module uses services of the VLAN management functionality to
configure VLAN memberships and VLAN port configurations such as PVID and
UVID. Currently we support the following VLAN user types:
Statis: These is referred to CLI/Web/SNMP.
NAS: NAS provides port-based authentication, which involves communications
between a Supplicant, Authenticator, and an Authentication Server.
Voice VLAN: Voice VLAN is a VLAN configured specially for voice traffic typically
originating from IP phones.
MVR: MVR is used to eliminate the need to duplicate multicast traffic for subscribers
in each VLAN. Multicast traffic for all channels is sent only on a single (multicast)
VLAN.
MSTP: The 802.1s Multiple Spanning Tree protocol (MSTP) uses VLANs to create
multiple spanning trees in a network, which significantly improves network resource
utilization while maintaining a loop-free environment.
Combined: List all types.
Indicates the ID of this particular VLAN.
A row of check boxes for each port is displayed for each VLAN ID.
If a port is included in a VLAN, an image
If a port is included in a Forbidden port list, an image
If a port is included in a Forbidden port list and dynamic VLAN user register VLAN
on same Forbidden port, then conflict port will be displayed as
will be displayed.
-204-
will be displayed.
.