KTI Networks KGS-1064-HP User Manual page 130

Queue Scheduler Weight
Queue Scheduler Percent
Port Shaper Enable
Port Shaper Rate
Port Shaper Unit
Save
Reset
Cancel
Controls the weight for this queue. The default value is "17". This value is restricted
to 1-100. This parameter is only shown if "Scheduler Mode" is set to "Weighted".
Shows the weight in percent for this queue. This parameter is only shown if
"Scheduler Mode" is set to "Weighted".
Controls whether the port shaper is enabled for this switch port.
Controls the rate for the port shaper. The default value is 500. This value is restricted
to 100-1000000 when the "Unit" is "kbps", and it is restricted to 1-3300 when the
"Unit" is "Mbps".
Controls the unit of measure for the port shaper rate as "kbps" or "Mbps". The default
value is "kbps".
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
Click to undo any changes made locally and revert to previously page.
-130-