Vlan Ports - KTI Networks KGS-1064-HP User Manual

3.13.2 VLAN Ports

VLAN USER
VLAN User module uses services of the VLAN management functionality to configure VLAN memberships
and VLAN port configuration such as PVID, UVID. Currently we support following VLAN User types:
Statis: This is referred to CLI/Web/SNMP:.
NAS: NAS provides port-based authentication, which involves communications between a Supplicant,
Authenticator, and an Authentication Server.
MVRP: Multiple VLAN Registration Protocol(MVRP) allows dynamic registration and deregistration of
VLANs on ports on a VLAN bridged network.
Voice VLAN: Voice VLAN is a VLAN configured specially for voice traffic typically originating from IP
phones.
MVR: MVR is used to eliminate the need to duplicate multicast traffic for subscribers in each VLAN.
Multicast traffic for all channels is sent only on a single (multicast) VLAN.
MSTP: The 802.1s Multiple Spanning Tree protocol (MSTP) uses VLANs to create multiple spanning trees in
a network, which significantly improves network resource utilization while maintaining a loop-free
environment.
Status
Port
PVID
Port Type
Ingress Filtering
Description
The logical port for the settings contained in the same row.
Shows the VLAN identifier for that port. The allowed values are 1 through 4095. The
default value is 1.
Shows the Port Type. Port type can be any of Unaware, C-port, S-port, Custom
S-port.
If Port Type is Unaware, all frames are classified to the Port VLAN ID and tags are
not removed.
C-port is Customer Port. S-port is Service port. Custom S-port is S-port with Custom
TPID.
Shows the ingress filtering on a port. This parameter affects VLAN ingress
-205-