Users - KTI Networks KGS-1064-HP User Manual

2.5.1.7.3 Users

Configuration
Delete
Engine ID
User Name
Security Level
Authentication Protocol Indicates the authentication protocol that this entry should belong to. Possible
Authentication Password A string identifying the authentication pass phrase. For MD5 authentication protocol,
Description
Check to delete the entry. It will be deleted during the next save.
An octet string identifying the engine ID that this entry should belong to. The string
must contain an even number between 10 and 64 hexadecimal digits, but all-zeros
and all-'F's are not allowed. The SNMPv3 architecture uses the User-based Security
Model (USM) for message security and the View-based Access Control Model
(VACM) for access control. For the USM entry, the usmUserEngineID and
usmUserName are the entry's keys. In a simple agent, usmUserEngineID is always
that agent's own snmpEngineID value. The value can also take the value of the
snmpEngineID of a remote SNMP engine with which this user can communicate. In
othe words, if user engine ID equal system engine ID then it is local user; otherwize
it's remote user.
A string identifying the user name that this entry should belong to. The allowed string
length is 1 to 32, and the allowed content is the ASCII characters from 33 to 126.
Indicates the security model that this entry should belong to. Possible security models
are:
NoAuth, NoPriv: None authentication and none privacy.
Auth, NoPriv: Authentication and none privacy.
Auth, Priv: Authentication and privacy.
The value of security level cannot be modified if entry already exists. That means
must first ensure that the value is set correctly.
authentication protocols are:
None: None authentication protocol.
MD5: An optional flag to indicate that this user using MD5 authentication protocol.
SHA: An optional flag to indicate that this user using SHA authentication protocol.
The value of security level cannot be modified if entry already exists. That means
must first ensure that the value is set correctly.
the allowed string length is 8 to 32. For SHA authentication protocol, the allowed
-42-