KTI Networks KGS-1064-HP User Manual page 18

2.1.2 IP
Configuration
DHCP Client
IP Address
IP Mask
IP Router
VLAN ID
DNS Server
DNS Proxy
Save
Reset
Renew
Note:
1. If DHCP fails and the configured IP address is zero, DHCP will retry. If DHCP fails and the configured IP
address is non-zero, DHCP will stop and the configured IP settings will be used. The DHCP client will
announce the configured System Name as hostname to provide DNS lookup.
2. The IP addresses should be in dotted decimal notation.
Description
Enable the DHCP client by checking this box.
Provide the IP address of this switch unit.
Provide the IP mask of this switch unit.
Provide the IP address of the default router for this switch unit.
Provide the managed VLAN
This setting is also called MVID (Management VID) as abbreviation.
Provide the IP address of the DNS Server in dotted decimal notation.
When DNS proxy is enabled, DUT will relay DNS requests to the current configured
DNS server on DUT, and reply as a DNS resolver to the client device on the network.
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
Click to renew DHCP. This button is only available if DHCP is enabled.
ID. The allowed range is 1 through 4095.
-18-