KTI Networks KGS-1064-HP User Manual page 143

Web management interface
Hide thumbs Also See for KGS-1064-HP:
Table of Contents

Advertisement

Frame Type
Frame Type can have any of the following values:
Any, Ethernet, LLC, SNAP, IPv4, IPv6
Note: All frame types are explained below.
1. Any: Allow all types of frames.
2. Ethernet: Ethernet Type Valid ethernet type can have a value within
0x600-0xFFFF or 'Any' but excluding 0x800(IPv4) and 0x86DD(IPv6), default
value is 'Any'.
3. LLC: SSAP Address Valid SSAP(Source Service Access Point) can vary from
0x00 to 0xFF or 'Any', the default value is 'Any'.
DSAP Address Valid DSAP(Destination Service Access Point) can vary from
0x00 to 0xFF or 'Any', the default value is 'Any'.
Control Valid Control field can vary from 0x00 to 0xFF or 'Any', the default
value is 'Any'.
4. SNAP: PID Valid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF
or 'Any', default value is 'Any'.
5. IPv4: Protocol IP protocol number: (0-255, TCP or UDP) or 'Any'.
Source IP Specific Source IP address in value/mask format or 'Any'. IP and Mask
are in the format x.y.z.w where x, y, z, and w are decimal numbers between 0 and
255. When Mask is converted to a 32-bit binary string and read from left to right,
all bits following the first zero must also be zero.
DSCP Diffserv Code Point value (DSCP): It can be a specific value, range of
values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF
or AF11-AF43.
IP Fragment IPv4 frame fragmented option: yes|no|any.
Sport Source TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP.
Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP.
6. IPv6: Protocol IP protocol number: (0-255, TCP or UDP) or 'Any'.
Source IP IPv6 source address: (a.b.c.d) or 'Any', 32 LS bits.
DSCP Diffserv Code Point value (DSCP): It can be a specific value, range of
values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF
or AF11-AF43.
Sport Source TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP.
Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP.
-143-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents