Static Table - KTI Networks KGS-1064-HP User Manual

Max Dynamic Clients
Translate dynamic to static
Save
Reset

2.5.2.5.2 Static Table

Configuration
Delete
Port
VLAN ID
IP Address
MAC Address
Add new entry
Save
Reset
Click Add New Entry :
and Port Mode on a given port are enabled, IP Source Guard is enabled on this given
port.
Specify the maximum number of dynamic clients can be learned on given ports. This
value can be 0, 1, 2 and unlimited. If the port mode is enabled and the value of max
dynamic client is equal 0, it means only allow the IP packets forwarding that are
matched in static entries on the specific port.
Click to translate all dynamic entries to static entries.
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
Description
Check to delete the entry. It will be deleted during the next save.
The logical port for the settings
The VLAN ID for the settings
Allowed Source IP address
Allowed MAC address
Click to add a new entry to the Static
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
IP Source Guard
-72-
table.