Lacp - KTI Networks KGS-1064-HP User Manual

TCP/UDP Port Number The
Aggregation Group Configuration
Group ID
Port Members
Save
Reset

2.6.2 LACP

Configuration
Port
LACP Enabled
Key
TCP/UDP port number can be used to calculate the destination port for the frame.
Check to enable the use of the TCP/UDP Port Number, or uncheck to disable. By
default, TCP/UDP Port Number is enabled.
Indicates the group ID for the settings contained in the same row. Group ID
"Normal" indicates there is no aggregation. Only one group ID is valid per port.
Each switch port is listed for each group ID. Select a radio button to include a port in
an aggregation, or clear the radio button to remove the port from the aggregation. By
default, no ports belong to any aggregation group. Only full duplex ports can join an
aggregation and ports must be in the same speed in each group.
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
Description
The port number for which the associated row configuration applies
Controls whether LACP
aggregation when 2 or more ports are connected to the same partner.
The Key value incurred by the port, range 1- 65535.
Auto: set the key as appropriate by the physical link speed, 10Mb = 1, 100Mb = 2, 1Gb = 3.
is enabled on this switch port. LACP will form an
-78-