KTI Networks KGS-1064-HP User Manual page 40

Trap Authentication Failure Indicates the SNMP entity is permitted to generate authentication failure traps.
Trap Link-up and Link-down Indicates the SNMP trap link-up and link-down mode operation. Possible modes are:
Trap OPA
Trap Inform Mode
Trap Inform Timeout
Trap Inform Retry Times
Trap Probe Security Engine ID Available for SNMP v3, indicates the SNMP trap probe security engine ID mode of
Trap Security Engine ID
Trap Security Name
Save
Reset
groups of contiguous zeros; but it can only appear once. It also used a following
legally IPv4 address. For example, '::192.1.2.34'.
Possible modes are:
Enabled: Enable SNMP trap authentication failure.
Disabled: Disable SNMP trap authentication failure.
Enabled: Enable SNMP trap link-up and link-down mode operation.
Disabled: Disable SNMP trap link-up and link-down mode operation.
Indicates the SNMP agent is permitted to generate SNMP OPA trap.
Enabled: Enable SNMP OPA trap
Disabled: Disable SNMP OPA trap
Indicates the SNMP trap inform mode operation. Possible modes are:
Enabled: Enable SNMP trap inform mode operation.
Disabled: Disable SNMP trap inform mode operation.
Indicates the SNMP trap inform timeout (seconds). The allowed range is 0 ~ 2147.
Indicates the SNMP trap inform retry times. The allowed range is 0 ~ 255.
operation. Possible values are:
Enabled: Enable SNMP trap probe security engine ID mode of operation.
Disabled: Disable SNMP trap probe security engine ID mode of operation.
Available for SNMP v3, indicates the SNMP trap security engine ID. SNMPv3 sends
traps and informs using USM for authentication and privacy. A unique engine ID for
these traps and informs is needed. When "Trap Probe Security Engine ID" is enabled,
the ID will be probed automatically. Otherwise, the ID specified in this field is used.
The string must contain an even number between 10 and 64 hexadecimal digits, but
all-zeros and all-'F's are not allowed.
Available for SNMP v3, indicates the SNMP trap security name. SNMPv3 traps and
informs using USM for authentication and privacy. A unique security name is needed
when traps and informs are enabled.
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
-40-