Sflow - KTI Networks KGS-1064-HP User Manual

2.20 sFlow

Receiver Configuration Description
Owner Basically, sFlow can be configured in two ways: Through local management using
the Web or CLI interface or through SNMP. This read-only field shows the owner of
the current sFlow configuration and assumes values as follows:
• If sFlow is currently unconfigured/unclaimed, Owner contains <none>.
• If sFlow is currently configured through Web or CLI, Owner contains <Configured
through local management>.
• If sFlow is currently configured through SNMP, Owner contains a string identifying
the sFlow receiver.
If sFlow is configured through SNMP, all controls - except for the Release-button -
are disabled to avoid inadvertent reconfiguration.
The button allows for releasing the current owner and disable sFlow sampling.
-147-