Storm Control - KTI Networks KGS-1064-HP User Manual

Action Parameters
Class
DPL
DSCP
Save
Reset
Cancel

2.17.11 Storm Control

There is a unicast storm rate control, multicast storm rate control, and a broadcast storm rate control. These
only affect flooded frames, i.e. frames with a (VLAN ID, DMAC) pair not present on the MAC Address table.
Configuration
Frame Type
Enable
Rate
Save
Reset
QoS class: (0-7) or 'Default'.
Valid Drop Precedence Level can be (0-1) or 'Default'.
Valid DSCP value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or 'Default'.
'Default' means that the default classified value is not modified by this QCE.
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
Click to undo any changes made locally and revert to previously page.
Description
The settings in a particular row apply to the frame type listed here: Unicast, Multicast
or Broadcast.
Enable or disable the storm control status for the given frame type.
The rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8, 16, 32, 64, 128,
256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K or 1024K.
The 1 kpps is actually 1002.1 pps.
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
-144-