Ntp - KTI Networks KGS-1064-HP User Manual

2.1.4 NTP

Configuration
Mode
Server #
Save
Reset
Description
Indicates the NTP mode operation. Possible modes are:
Enabled: Enable NTP mode operation. When enable NTP mode operation, the agent
forward and to transfer NTP messages between the clients and the server when they
are not on the same subnet domain.
Disabled: Disable NTP mode operation.
Provide the NTP IPv4 or IPv6 address of this switch. IPv6 address is in 128-bit
records represented as eight fields of up to four hexadecimal digits with a colon
separates each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a
special syntax that can be used as a shorthand way of representing multiple 16-bit
groups of contiguous zeros; but it can only appear once. It also used a following
legally IPv4 address. For example, '::192.1.2.34'.
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
-21-