KTI Networks KGS-1064-HP User Manual page 126

DP level
PCP
DEI
Tag Class.
DSCP Based
Save
Reset
QoS class: 1 0 2 3 4 5 6 7
If the port is VLAN aware, the frame is tagged and Tag Class is enabled, then the
frame is classified to a QoS class that is mapped from the PCP and DEI value in the
tag. Otherwise the frame is classified to the default QoS class.
The classified QoS class can be overruled by a QCL entry.
Note: If the default QoS class has been dynamically changed, then the actual default
QoS class is shown in parentheses after the configured default QoS class.
Controls the default Drop Precedence Level.
All frames are classified to a DP level.
If the port is VLAN aware and the frame is tagged, then the frame is classified to a
DP level that is equal to the DEI value in the tag. Otherwise the frame is classified to
the default DP level.
If the port is VLAN aware, the frame is tagged and Tag Class. is enabled, then the
frame is classified to a DP level that is mapped from the PCP and DEI value in the
tag. Otherwise the frame is classified to the default DP level.
The classified DP level can be overruled by a QCL entry.
Controls the default PCP value.
All frames are classified to a PCP value.
If the port is VLAN aware and the frame is tagged, then the frame is classified to the
PCP value in the tag. Otherwise the frame is classified to the default PCP value.
Controls the default DEI value.
All frames are classified to a DEI value.
If the port is VLAN aware and the frame is tagged, then the frame is classified to the
DEI value in the tag. Otherwise the frame is classified to the default DEI value.
Shows the classification mode for tagged frames on this port.
Disabled: Use default QoS class and DP level for tagged frames.
Enabled: Use mapped versions of PCP and DEI for tagged frames.
Click on the mode in order to configure the mode and/or mapping.
Note: This setting has no effect if the port is VLAN unaware. Tagged frames received
on VLAN unaware ports are always classified to the default QoS class and DP level.
Click to Enable DSCP Based QoS Ingress Port Classification.
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
-126-