Mvr - KTI Networks KGS-1064-HP User Manual

2.9 MVR

The MVR feature enables multicast traffic forwarding on the Multicast VLANs. In a multicast television
application, a PC or a network television or a set-top box can receive the multicast stream. Multiple set-top
boxes or PCs can be connected to one subscriber port, which is a switch port configured as an MVR receiver
port. When a subscriber selects a channel, the set-top box or PC sends an
Switch A to join the appropriate multicast group address. Uplink ports that send and receive multicast data to
and from the multicast VLAN are called MVR source ports. It is allowed to create at maximum 8 MVR
VLANs with corresponding channel settings for each Multicast VLAN. There will be totally at maximum 256
group addresses for channel settings.
Configuration
MVR Mode
Description (Example with MSTI1)
Enable/Disable the Global MVR.
The Unregistered Flooding control depends on the current configuration in
IGMP/MLD Snooping. It is suggested to enable Unregistered Flooding control when
IGMP/MLD
-89-
report message to