KTI Networks KGS-1064-HP User Manual page 129

Port
Click Port 1 icon as an example:
Configuration
Scheduler Mode
Queue Shaper Enable
Queue Shaper Rate
Queue Shaper Unit
Queue Shaper Excess
Shows "disabled" or actual port shaper rate - e.g. "800 Mbps".
Description
Controls whether the scheduler mode is "Strict Priority" or "Weighted" on this switch
port.
Controls whether the queue shaper is enabled for this queue on this switch port.
Controls the rate for the queue shaper. The default value is 500. This value is
restricted to 100-1000000 when the "Unit" is "kbps", and it is restricted to 1-3300
when the "Unit" is "Mbps".
Controls the unit of measure for the queue shaper rate as "kbps" or "Mbps". The
default value is "kbps".
Controls whether the queue is allowed to use excess bandwidth.
-129-