Poe - KTI Networks KGS-1064-HP User Manual

3.11 PoE

Status
Local Port
PD Class
Power Requested
Power Allocated
Power Used
Current Used
Priority
Port Status
Description
This is the logical port number for this row.
Each PD is classified according to a class that defines the maximum power the PD
will use. The PD Class shows the PDs class.
Five Classes are defined:
Class 0: Max. power 15.4 W
Class 1: Max. power 4.0 W
Class 2: Max. power 7.0 W
Class 3: Max. power 15.4 W
Class 4: Max. power 30.0 W
The Power Requested shows the requested amount of power the PD wants to be
reserved.
The Power Allocated shows the amount of power the switch has allocated for the PD.
The Power Used shows how much power the PD currently is using.
The Power Used shows how much current the PD currently is using.
The Priority shows the port's priority configured by the user.
The Port Status shows the port's status. The status can be one of the following values:
PoE not available - No
PoE turned OFF - PoE disabled : PoE is disabled by user.
PoE turned OFF - Power budget exceeded - The total requested or used power by
the PDs exceeds the maximum power the Power Supply can deliver, and port(s) with
the lowest priority is/are powered down.
No PD detected - No PD detected for the port.
PoE turned OFF - PD overload - The PD has requested or used more power than the
port can deliver, and is powered down.
PoE chip found - PoE not supported for the port.
-201-