KTI Networks KGS-1064-HP User Manual page 140

Configuration
DSCP
Ingress
Translate
Classify
Egress
Remap DP0
Remap DP1
Save
Reset
Description
Maximal number of supported DSCP values are 64 and valid DSCP value ranges
from 0 to 63.
Ingress side DSCP can be first translated to new DSCP before using the DSCP for
QoS class and DPL map.
There are two configuration parameters for DSCP Translation – Translate & Classify.
DSCP at Ingress side can be translated to any of (0-63) DSCP values.
Click to enable Classification at Ingress side.
There are the following configurable parameters for Egress side -
1. Remap DP0 Controls the remapping for frames with DP level 0.
2. Remap DP1 Controls the remapping for frames with DP level 1.
Select the DSCP value from select menu to which you want to remap. DSCP value
ranges form 0 to 63.
Select the DSCP value from select menu to which you want to remap. DSCP value
ranges form 0 to 63.
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
-140-