Spanning Tree - KTI Networks KGS-1064-HP User Manual

Configuration
Enable Loop Protection
Transmission Time
Shutdown Time
Port
Enable
Action
Tx Mode
Save
Reset

2.8 Spanning Tree

This section is used to set configuration for supporting Spanning Tree protocols including STP, RSTP, and
MSTP.
Description
Controls whether loop protections is enabled (as a whole).
The interval between each loop protection PDU sent on each port. valid values are 1 to 10
seconds.
The period (in seconds) for which a port will be kept disabled in the event of a loop is detected
(and the port action shuts down the port). Valid values are 0 to 604800 seconds (7 days). A
value of zero will keep a port disabled (until next device restart).
The switch port number of the port
Controls whether loop protection is enabled on this switch port.
Configures the action performed when a loop is detected on a port. Valid values are
Shutdown Port, Shutdown Port and Log or Log Only.
Controls whether the port is actively generating loop protection PDU's, or whether it
is just passively looking for looped PDU's.
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
-80-