KTI Networks KGS-1064-HP User Manual page 93

Unregistered IPMCv4 Flooding Enabled
IGMP SSM Range
Leave Proxy Enabled
Proxy Enabled
Router Port
Fast Leave
Throttling
Save
Reset
Enable unregistered IPMCv4 traffic flooding.
The flooding control takes effect only when IGMP Snooping is enabled.
When IGMP Snooping is disabled, unregistered IPMCv4 traffic flooding is always
active in spite of this setting.
SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers run
the SSM service model for the groups in the address range.
Enable IGMP Leave Proxy. This feature can be used to avoid forwarding unnecessary
leave messages to the router side.
Enable IGMP Proxy. This feature can be used to avoid forwarding unnecessary join
and leave messages to the router side.
Specify which ports act as router ports. A router port is a port on the Ethernet switch
that leads towards the Layer 3 multicast device or
If an aggregation member port is selected as a router port, the whole aggregation will
act as a router port.
Enable the fast leave on the port.
Enable to limit the number of multicast groups to which a switch port can belong.
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
-93-
IGMP querier.