5.3.2 Image Select
This page provides information about the active and alternate (backup) firmware images in the device, and
allows you to revert to the alternate image.
The web page displays two tables with information about the active and alternate firmware images.
Note:
1. In case the active firmware image is the alternate image, only the "Active Image" table is shown. In this
case, the
2. If the alternate image is active (due to a corruption of the primary image or by manual intervention), uploading
a new firmware image to the device will automatically use the primary image slot and activate this.
3. The firmware version and date information may be empty for older firmware releases. This does not
constitute an error.
Image Information
Image
Version
Date
button is also disabled.
The flash index name of the firmware image. The name of primary (preferred) image
is "managed", the alternate image is named "managed.bk".
The version of the firmware image.
Remark: The version of the image currently used in your switch device might not
match the one shown above. Every device was configured with the latest release of
the images before being shipped from factory.
The date where the firmware was produced.
Click to use the alternate image. This button may be disabled depending on system
-218-