KTI Networks KGS-1064-HP User Manual page 65

Port
Policy ID
Action
Rate Limiter ID
Port Redirect
Mirror
Logging
Shutdown
State
Counter
Save
Reset
Refresh
Clear
The logical port for the settings contained in the same row.
Select the policy to apply to this port. The allowed values are 0 through 255. The
default value is 0.
Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default
value is "Permit".
Select which rate limiter to apply on this port. The allowed values are Disabled or the
values 1 through 16. The default value is "Disabled".
Select which port frames are copied to. The allowed values are Disabled or a specific
port number. The default value is "Disabled".
Specify the mirror operation of this port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is "Disabled".
Specify the logging operation of this port. The allowed values are:
Enabled: Frames received on the port are stored in the System Log.
Disabled: Frames received on the port are not logged.
The default value is "Disabled".
Please note that the System Log memory size and logging rate is limited.
Specify the port shut down operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled.
The default value is "Disabled".
Specify the port state of this port. The allowed values are:
Enabled: To reopen ports by changing the volatile port configuration of the
module.
Disabled: To close ports by changing the volatile port configuration of the ACL user
module.
The default value is "Enabled".
Counts the number of frames that match this ACE.
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
Click to refresh the page; any changes made locally will be undone.
Click to clear the counters.
-65-
ACL user