Reading/Writing of program
The outline operations to write the program from MT Developer2 to the program memory of Motion CPU are described.
Operation by MT Developer2
■Reading of program by the reading operation of MT Developer2
If reading of program is performed, all files stored in the program folder and all files stored in the online change folder are
read, and a merged program is reflected to the project. (A program configuration is restored in the state that it was being
executed in the Motion CPU.)
Motion CPU
Program folder
Program No.0
Program No.2
Program No.5
Program No.6
Program No.100
Online change folder
Program No.2
Program No.5
■Writing of program by the writing operation of MT Developer2
If writing of program is performed, the program files are updated and stored in the program folder. Also, when an online
change folder exists, the online change folder is deleted.
Motion CPU
Program folder
Program No.0
Program No.2
Program No.5
Program No.6
Program No.100
Online change folder
Program No.2
Program No.5
7 MOTION SFC FUNCTIONS
304
7.1 Online Change in the Motion SFC Program
Personal computer
Read
Personal computer
Write
Delete
MT Developer2
Program No.0
Program No.2
Program No.5
Program No.6
Program No.100
MT Developer2
Program No.0
Program No.2
Program No.5
Program No.6
Program No.100