Write Bit Device To The Motion Cpu: M(P).Bitwr/D(P).Bitwr - Mitsubishi Electric R16MTCPU Programming Manual

Write bit device to the Motion CPU: M(P).BITWR/D(P).BITWR

Instruction Condition
MP.BITWR
DP.BITWR
M.BITWR
D.BITWR
*1 : Instruction (M(P).BITWR: M, D(P).BITWR: D)
Setting data
■Usable devices
: Usable, : Usable partly
Setting Usable devices
*3
data
Internal devices
(System, User)
Bit Word

(n1)

(D1)

(n2)
*1 *2

(D2)
*1

(D3)
*1 Omission possible with both of (D2) and (D3) omission.
*2 Local devices cannot be used.
*3 Setting data (n1) to (D3): Index qualification possible (except constant)
■Description, range, setting side, data type
Setting data Description
(n1) (First I/O No. of the target CPU)/16
Value to specify actually is the following.
CPU No.2: 3E1H, CPU No.3: 3E2H, CPU No.4: 3E3H
(D1) Bit device of the target Motion CPU that conducts the bit operation (includes word device bit
specification)
(n2) Bit operation
Value to specify actually is the following.
OFF: 0
ON: 1
*1
(D2) Complete devices
• (D2+0): Device which make turn on for one scan at accept completion of instruction.
• (D2+1): Device which make turn on for one scan at accept abnormal completion of
instruction. ("D2+0" also turns on at the abnormal completion.)
*1
(D3) Complete status storage device
*1 Omission possible with both of (D2) and (D3) omission.
*2 Motion CPU cannot be set as CPU No.1 in the Multiple CPU configuration.
2 MOTION DEDICATED PLC INSTRUCTION
76
2.2 Motion Dedicated PLC Instruction
Sequence program
Command
Command
Command
Command
File register Link direct
device J□\□
Bit Word Bit



*2

*2 *2

*2
*1
P.BITWR (n1)
P.BITWR (n1) (D1) (n2)
.BITWR (n1)
.BITWR (n1) (D1) (n2)
Module access
device U□\G□
Word Bit Word
(D1) (n2)
(D2) (D3)
(D1) (n2)
(D2) (D3)
Index Constant
register
Z□
Decimal K,
Hexadecimal
H


Setting range
3E1H to 3E3H

0 to 1


Others
Real
character
string

Set by Data type
User 16-bit binary
User Character
string
User 16-bit binary
System Bit
System Word