Cosine: Cos - Mitsubishi Electric R16MTCPU Programming Manual

Cosine: COS

Format
COS(S)
Setting data
■Usable data
: Usable
Setting Usable Data
data
Bit
device

(S)
■Description, data type of result
Setting data
(S)
Processing details
• COS (cosine) operation is performed on the data specified with (S).
• The data specified with (S) is in an angle (degree) unit.
• If (S) is an integer type, it is converted into a floating-point type before operation is performed.
Operation error
An operation error will occur if:
• (S) is an indirectly specified device and its device No. is outside the range.
Program example
■Program which performs the COS operation of D0 and substitutes the result to #0F
#0F = COS(D0)
#3 #2
#0F
4 OPERATION CONTROL PROGRAMS
146
4.7 Standard Functions
Number of basic steps
4
Word device
16-bit 32-bit 64-bit
integer integer floating
type type (L) point
type (F)
  
Description
Angle data on which COS (cosine) operation will be performed
#1 #0
0.5
Usable steps
F/FS

Constant
16-bit 32-bit 64-bit
integer integer floating
type type point
(K/H) (K/H, L) type (K)
  
D0 60
G

Calculation Bit
expression conditional
expression
 
Data type of result
Floating-point type
Comparison
conditional
expression
