Port Private-Vlan Host - HPE FlexNetwork 5130 EI Series Command Reference Manual

Field
IPv6 global unicast addresses
Description
Name
Tagged ports
Untagged ports
Related commands
private-vlan (VLAN view)
private-vlan primary

port private-vlan host

Use port private-vlan host to configure a port as a host port.
Use undo port private-vlan to restore the default.
Syntax
port private-vlan host
undo port private-vlan
Default
A port is not a host port.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Usage guidelines
If the port has been assigned to a secondary VLAN, the command assigns the port to the primary
VLAN associated with the secondary VLAN. Also, the following events occur:
•
For an access port, the device performs the following operations:
Changes the port link type to hybrid.
Configures the secondary VLAN as the PVID.
Description
Global unicast IPv6 address of the VLAN interface. This field is not
displayed when no IPv6 address is configured for the VLAN interface.
The IPv6 address states are as follows:
•
TENTATIVE—Initial state. DAD is being performed or is to be
performed on the address. An address in this state cannot be used
as the source address or destination address of packets.
•
DUPLICATE—DAD has been completed for the address. The
address is not unique on the link and cannot be used.
•
PREFERRED—The address is preferred and can be used as the
source or destination address of a packet. If an address is in this
state, the command does not display the address state.
•
DEPRECATED—The address is beyond the preferred lifetime but
within the valid lifetime. It is valid, but it cannot be used as the
source address for a new connection. Packets destined to the
address are processed correctly.
VLAN description.
VLAN name.
Tagged members of the VLAN.
Untagged members of the VLAN.
210