Display Trill Graceful-Restart Status - HPE FlexFabric 5930 Series Command Reference Manual

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
count: Displays the number of entries.
nickname nickname: Specifies an RB by its nickname, a hexadecimal number in the range of 0x1 to
0xFFFE. If no RB is specified, the command displays information about all RBs.
Examples
# Display all entries in the TRILL FIB.
<Sysname> display trill fib
Flags: T-Transit, E-Egress
Destination
0xfa1b
0x899b
# Display the number of entries in the TRILL FIB.
<Sysname> display trill fib count
Total number of TRILL FIB destinations: 1
Total number of TRILL FIB entries: 2
Table 3 Command output
Field
Destination
HopCount
NextHop
Interface
Total number of TRILL FIB destinations
Total number of TRILL FIB entries

display trill graceful-restart status

Use display trill graceful-restart status to display GR status information for TRILL.
Syntax
display trill graceful-restart status
Views
Any view
Predefined user roles
network-admin
network-operator
HopCount NextHop
63 N/A
63 0x2a5c
Interface
N/A
FGE1/0/1
Description
Nickname of the destination RB.
Number of hops to the destination RB.
Nickname of the next-hop RB.
Outgoing port of frames.
Number of destination RBs in the TRILL FIB.
Number of entries in the TRILL FIB.
4
Flags
E
T