Enable - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference

L4 destination port
Sampling algorithm
PAD
PAD
PAD
Sampling interval
Table 70 Command output
Field
Flow template refresh frequency
Flow template refresh interval
Active flow templates
Created flow templates
Protocol-port outbound template
Protocol-port inbound template
Packets
Last template export time
Field count
Field type
Flows
Out packets
In packets
Out bytes
In bytes
First forwarded
Last forwarded
L4 source port
L4 destination port
PAD
Sampling interval

enable

Use enable to enable a NetStream aggregation mode.
Use undo enable to disable a NetStream aggregation mode.
Syntax
enable
undo enable
2
1
1
1
1
4
Description
Refresh frequency at which the templates are sent, in packets.
Refresh interval at which the templates are sent, in minutes.
Number of active NetStream templates.
Number of templates that have been created.
Information of the protocol-port template in the outbound
direction.
Information of the protocol-port template in the inbound direction.
Number of packets sent by using the template.
Time when the template was last exported.
Total number of fields in a template.
Type of a field in the template.
Number of aggregate flows.
Number of sent packets.
Number of received packets.
Size of sent packets, in bytes.
Size of received packets, in bytes.
System time when the first packet was forwarded, accurate to
milliseconds.
System time when the last packet was forwarded, accurate to
milliseconds.
Source UDP or TCP port.
Destination UDP or TCP port.
Padding string.
Sampling rate.
309